Research methods guide
Understanding and Addressing Multivariate Normality in Structural Equation Modeling (SEM)

Why Multivariate Normality Matters in SEM
Structural Equation Modeling (SEM) relies on the assumption that observed variables follow a multivariate normal distribution. Unlike univariate normality—which assesses individual variables in isolation—multivariate normality examines the joint distribution of all variables simultaneously. This distinction is critical because severe multivariate non-normality can distort SEM results even when individual variables appear normal (West, Finch, & Curran, 1995).
When multivariate normality is violated, it primarily affects fit indices (e.g., chi-square, CFI, RMSEA) and standard errors, while parameter estimates (e.g., factor loadings, path coefficients) remain relatively stable (Finch, West, & MacKinnon, 1997). However, the consequences for inference—such as inflated Type I error rates—can be substantial, particularly in smaller samples or complex models. Researchers should also review Type I vs Type II Errors in Quantitative Research: Understanding False Positives and False Negatives to understand how distributional issues affect error rates.
The impact of non-normality is not uniform across distributional characteristics. Multivariate kurtosis (a measure of tail heaviness) is generally more problematic than skewness for SEM fit indices (West, Finch, & Curran, 1995). While univariate skewness > 2 and kurtosis > 7 may signal concern, multivariate diagnostics—such as Mardia’s test—provide a more comprehensive assessment. To further evaluate model performance under different distributional assumptions, analysts often consult Structural Equation Modeling (SEM) Fit Indices.
Diagnosing Multivariate Normality
Statistical Tests: Mardia’s Skewness and Kurtosis
Mardia’s test evaluates multivariate skewness and kurtosis by comparing observed moments to those expected under normality. In large samples, the test statistics are approximately normally distributed, allowing for z-tests. However, significance alone does not indicate practical severity; the magnitude of deviations (e.g., normalized Mardia’s kappa > 3) is more informative (Bentler & Wu, 2002).
Key thresholds include:
- Normalized Mardia’s kappa > 3: Suggests problematic kurtosis, potentially distorting chi-square statistics (Bentler & Wu, 2002).
- Normalized kappa ≥ 30 in EQS: Empirically indicates severe kurtosis (Newsom, 200X).
- Univariate skewness > 2 or kurtosis > 7: Loose guidelines for preliminary screening (though multivariate assessment is essential). Before applying these checks, researchers should consult How to Assess Normality in Quantitative Research to ensure proper univariate evaluation.
Software implementation varies:
- EQS and LISREL: Provide built-in Mardia’s test outputs.
- SPSS/SAS: Require macros (e.g., Lawrence DeCarlo’s macros).
- R: The `MVN` package (`mardiaTest` function) offers multivariate diagnostics.
Visual Diagnostics: Q-Q Plots and Histograms
While statistical tests quantify deviations, visual tools help interpret results:
- Q-Q plots: Compare observed quantiles to a normal distribution. Systematic deviations (e.g., heavy tails) suggest non-normality.
- Histograms: Reveal skewness (asymmetry) or kurtosis (peakedness/tails).
- Scatterplot matrices: Identify nonlinear relationships or outliers affecting joint distributions.
Visual diagnostics are complementary but cannot replace multivariate tests, as they assess marginal (univariate) distributions rather than joint behavior. Furthermore, analysts should screen for extreme cases using Outlier Detection and Treatment since multivariate outliers heavily inflate kurtosis measures.
Consequences of Violating Multivariate Normality
Distorted Fit Indices and Standard Errors
When multivariate normality is violated:
- Chi-square statistics are inflated, leading to over-rejection of true models (Type I errors).
- Standard errors are underestimated, increasing confidence intervals’ precision artificially.
- Fit indices (CFI, RMSEA, TLI) may be biased, though their direction depends on the type of non-normality (e.g., kurtosis vs. skewness).
The Satorra-Bentler scaling correction adjusts chi-square for multivariate kurtosis. A correction factor > 1.0 indicates non-normality, while values > 1.6 suggest severe distortion (Hu & Bentler, 1999). However, reliable corrections may require sample sizes > 250 in complex models (Yu & Muthén, 2002).
Parameter Estimates: Robustness Under Non-Normality
Contrary to fit indices, parameter estimates (e.g., loadings, regression paths) are generally robust to non-normality (Finch, West, & MacKinnon, 1997). This stability means that:
- Factor loadings and path coefficients remain unbiased.
- Hypothesis tests on parameters (e.g., t-tests for loadings) are less affected than overall model fit.
However, standardized coefficients (e.g., beta weights) may be less reliable due to distorted variance-covariance matrices.
Solutions for Non-Normal Data in SEM
Robust Estimation Methods
When non-normality is detected, robust estimators mitigate its effects:
- Bollen-Stine bootstrapping: Resamples the data to generate a sampling distribution for the chi-square statistic, providing corrected p-values. Researchers can explore resampling mechanics further in Bootstrapping in Quantitative Research.
- Weighted Least Squares (WLS): Uses a weight matrix to account for non-normality, though it requires large samples and categorical data.
- Asymptotically Distribution-Free (ADF) estimators: Adjust the covariance matrix to reduce non-normality bias.
- Maximum Likelihood with Satorra-Bentler correction: Adjusts chi-square for kurtosis but may not fully resolve skewness issues.
These methods are particularly useful when:
- Sample sizes are moderate to large (> 200).
- Non-normality is severe but not extreme (e.g., Mardia’s kappa < 10).
Data Transformations
Transformations can improve normality but must be applied judiciously:
- Log or square-root transformations: Useful for right-skewed data (e.g., income, reaction times).
- Winsorizing: Trims extreme values to reduce kurtosis.
- Box-Cox transformations: Family of power transformations to optimize normality.
Cautions:
- Transformations may distort interpretation (e.g., log-transformed variables are no longer on the original scale).
- Multivariate normality must be rechecked after transformation.
Sample Size Considerations
Larger samples (n > 250) tolerate non-normality better due to the Central Limit Theorem’s stabilizing effect on parameter estimates. However:
- Fit indices (e.g., RMSEA) remain sensitive to non-normality even in large samples.
- Robust estimators (e.g., bootstrapping) may require n > 200 for stable results.
For smaller samples (n < 100), non-normality is more consequential, and robust methods or transformations are strongly recommended. When complex project structures or advanced quantitative designs are required, researchers often rely on professional Statistical Analysis and Quantitative Research Services.
Best Practices for SEM Practitioners
Step 1: Assess Univariate and Multivariate Normality
Begin with descriptive statistics:
- Compute skewness and kurtosis for all observed variables.
- Flag univariate values outside ±2 (skewness) or ±7 (kurtosis) as potential outliers.
Proceed to multivariate diagnostics:
- Use Mardia’s test (via EQS, LISREL, or R/SPSS macros).
- Interpret normalized kappa values in context (e.g., ≥3 for concern, ≥30 for severe kurtosis).
Step 2: Evaluate the Severity of Violations
Consider:
- Magnitude of deviations (e.g., Mardia’s kappa) over p-values.
- Type of non-normality (kurtosis is more critical than skewness).
- Sample size (smaller samples are more vulnerable).
Step 3: Choose an Appropriate Estimation Method
Select based on:
- Data characteristics (e.g., WLS for ordinal data, bootstrapping for continuous non-normal data).
- Model complexity (robust methods may be computationally intensive).
- Research goals (e.g., prioritize parameter estimates over fit indices if stability is the goal).
Step 4: Report Transparently
Include in methods/results:
- Evidence of normality testing (univariate and multivariate).
- Estimation method used (e.g., ML with Satorra-Bentler correction).
- Sensitivity analyses (e.g., comparing ML and robust estimators).
Key Takeaways
- Multivariate normality is essential for accurate SEM fit indices and standard errors, though parameter estimates are robust.
- Mardia’s test and visual diagnostics (Q-Q plots) are critical but underutilized tools.
- Robust estimators (bootstrapping, WLS) and transformations are primary solutions for non-normal data.
- Sample size and the severity of non-normality dictate the appropriate remediation strategy.
- Transparency in reporting normality assessments and estimation methods strengthens study credibility.
Further Reading
For deeper exploration, consult:
- West, S. G., Finch, J. F., & Curran, P. J. (1995). An examination of multivariate nonnormality in structural equation modeling.
- Finch, J. F., West, S. G., & MacKinnon, D. P. (1997). The robustness of maximum likelihood estimation in structural equation modeling.
- Hu, L., & Bentler, P. M. (1999). Cutoff criteria for fit indexes in model evaluation: Conventional criteria versus new alternatives.
- Bentler, P. M., & Wu, Y. (2002). On the use of Mardia’s multivariate kurtosis measures in structural equation modeling.
